带式油水分离机（刮油机、撇油机、浮油捞除机）广泛应用于清洗机、数控机床、CNC加工中心等机床中的水剂、乳化液中漂浮的油污自动分离出来，从而延长了冷却液的寿命，同时也延长了刀具的使用寿命，保证了加工精度

工作原理：

利用油水之间不同重力和表面张力等特性，当刮油带穿过水面时，吸附并带走表面各种浮油

特点：

1.特制亲油疏水不锈钢带，吸油性强

2.不锈钢机壳，适合清洗机水槽适用

3.使用PP材质驱动轮，消除铁屑吸附驱动轮不易清理的问题

 4采用中空轴电机，使电机与箱体分离，避免蒸汽进入电机（特别适合于清洗机）

5.加大油槽斜度，排油更加顺畅，不易堵塞

6.可根据客户提供水池深度定制钢带

规格：

1.电压：220V/380V/三相220V

2.功率：25W

3.刮油量：0-40L/H

4.钢带宽:100mm

5.重量：14KG

TB-80B  OIL  SKIMMER

Belt type oil-water separator is widely used in CNC machine tools, CNC machining centers and other machine tools in the water, oil floating in emulsion automatic separation, thus extending the life of the coolant, but also extend the service life of the tool, to ensure the processing accuracy

Working principle:

Using the characteristics of different gravity and surface tension between oil and water, when the wiper belt passes through the water, it sticks and takes away all kinds of floating oil on the surface

Features:

1. Special oil-wet and water-repellent stainless steel belt with strong oil absorption

2. Stainless steel case, suitable for washing machine sink

3.PP drive wheel eliminates the problem of iron scrap adsorption drive wheel is not easy to clean

4. Hollow shaft motor is used to separate the motor from the box body to avoid steam entering the motor

5. Increase the slant of oil groove to make oil drainage smoother and not easy to be blocked

6. The steel belt can be customized according to the depth of the pool provided by customers

Specifications:

1. Voltage: 220V/380V/ three-phase 220V

2. Power: 25W

3. Oil scraping amount: 0-40L/H

4. Steel bandwidth :100mm

5. Weight: 14KG